handwheel在中文中有"手轮机构、手轮直径"的意思,还有驾驶盘的意思,在线读音是['hændwi:l],handwheel常被用作名词,在《实用英语词典》中,共找到94个与handwheel相关的句子。
Handwheel的释义
1.手轮机构
例句:If the connection is to be made by soldering, turn the handwheel to the fully open position before applying heat. (如果是焊接连接,则在加热之前要把手轮旋转到全开的位置。)
2.手轮直径
例句:The handwheel, When the handwheel left rotates, the nets yarn at a state, when the handwheel right when rotating gauze is flabby condition. (手轮;当手轮向左旋转时,网纱处于张紧状态,当手轮向右旋转时网纱处于松弛状态。)
3.驾驶盘
例句:Regulation is accomplished by rotating the handwheel clockwise. (规则要求按顺时针方向旋转手轮。)
4.机、驾驶盘
例句:Carefully remove the handwheel. Slight tapping with a mallet may be required, but do not change the valve stem position. (翻译:小心拆卸手轮。如果需要,用木槌轻轻敲打,但是不要改变阀杆位置。)
用法及短语
handwheel一般作为名词使用,如在disc handwheel(圆轮缘手轮)、elevating handwheel((火炮)高低机手轮)、handwheel switch(手轮开关)等常见短语中出现较多。
disc handwheel | 圆轮缘手轮 |
elevating handwheel | (火炮)高低机手轮 |
handwheel switch | 手轮开关 |
reply handwheel | 回令手轮[柄] |
reversing handwheel | un. 倒车手轮\n[网络] 逆转手柄 |
sinuate handwheel | 波纹手轮 |
slewing handwheel | 回转手轮 |
small handwheel | 小手轮 |
speed handwheel | [网络] 调速手轮 |
例句
1. Regulation is accomplished by rotating the handwheel clockwise. (翻译:规则要求按顺时针方向旋转手轮。)
2. Carefully remove the handwheel. Slight tapping with a mallet may be required, but do not change the valve stem position. (翻译:小心拆卸手轮。如果需要,用木槌轻轻敲打,但是不要改变阀杆位置。)
3. To order handwheel or chainwheel actuators, add the appropriate order code to the basic valve order code. (翻译:订购手轮或链轮执行器时,要在主阀门订购代码基础上增加适当的执行器订购代码。)
4. Specify required extension length from centerline of valve to handwheel. (翻译:注明从阀门中心到手轮的所需加长件的长度。)
5. Reinstall handwheel and secure with retaining bolt. (翻译:重新安装手轮,用固定螺栓加固。)
6. FEATURES: adopted cricoid feed foot and driving handwheel . Not wrinkling when sewing thin materials. With uniform and pleasing outline. (翻译:采用轮型送步牙及驱动式轮线,缝制厚薄物品不起皱,缝目均匀美观。)
7. The handwheel can be removed and repositioned any of six positions around the stem. (翻译:手轮可以拆卸并重新定位在环绕阀杆的六个位置中的任何一个位置上。)
8. Includes floorstand with gate position indicator, handwheel, fittings and extension. (翻译:包括带有闸板指示器的地轴承架,手轮,连接件和加长件。)
9. To order handwheel or chainwheel actuators, add the appropriate order code to the basic valve order code. (翻译:如果要订购手轮或链轮执行器,需要在主阀门订购代码的基础上添加适当的执行器订购代码。)
10. Remove handwheel retaining bolt. (翻译:拆卸手轮固定螺栓。)
11. Cast Steel Valves Hammerblow Handwheel, Seat Rings, Wedges. (翻译:铸钢阀门锤击手轮,阀座环,楔形闸板。)
12. Bevel gear actuators are available on 3-36 " (DN80-DN900) valves with handwheel or chainwheel actuators. " (翻译:锥齿轮执行器可以应用在通径DN80~DN900的阀门上,还可以带手轮或链轮执行器。)
13. To order, specify handwheel actuator code, and add floorstand description as second line information. (翻译:如果要订购位置指示地轴承架,请指定手轮执行器代码,在第二行增加地轴承架的描述信息。)
14. The amount of tactile feedback to the driver through the handwheel may also be electronically controlled. (翻译:通过方向盘反馈到驾驶员的感官量也是通过电子控制。)
15. This dimension must be at least twice the dimension from center line to handwheel. (翻译:这个尺寸必须至少为从阀门中心线至手轮距离长度的两倍。)
近义词&反义词
handwheel作为名词的时候,其近义词以及反义词有s、handwheels等。
本文来自投稿,不代表逐光英语立场,如若转载,请注明出处
评论列表(85条)